Building the project using Docker
Building using Docker is the simplest way to build the project on your local system. If you install Docker, it will contain all the dependencies in the image, and prevents the need to install them separately in your system.
Note
See Building nRF Connect SDK applications with Docker for more information.
The Docker image is not intended to be shared.
The Docker image is also used to automate the building of HEX files using GitHub Actions, which is used to continuously deliver the firmware builds in the out-of-tree example repository.
To build the Docker image for this project, run the following commands:
git clone --branch v1.6.x --single-branch \ https://github.com/NordicSemiconductor/asset-tracker-cloud-firmware-azure nrf-asset-tracker-firmware-azure cd nrf-asset-tracker-firmware-azure docker build -t asset-tracker-firmware-docker .
Then, follow the configuration instructions for the firmware and update the prj.conf
file and the overlay-debug.conf
file.
Build the project
Build the project for your nRF9160-based device using the specified commands.
Thingy:91 (PCA20035)
docker run --rm -v ${PWD}:/workdir/ncs/firmware asset-tracker-firmware-docker /bin/bash -c 'cd /workdir/ncs/firmware; west build -p always -b thingy91_nrf9160ns -- -DOVERLAY_CONFIG="overlay-debug.conf;asset-tracker-cloud-firmware-azure.conf"'
ls -la build/zephyr/merged.hex
nRF9160 DK (PCA10090)
docker run --rm -v ${PWD}:/workdir/ncs/firmware asset-tracker-firmware-docker /bin/bash -c 'cd /workdir/ncs/firmware; west build -p always -b nrf9160dk_nrf9160ns -- -DOVERLAY_CONFIG="overlay-debug.conf;asset-tracker-cloud-firmware-azure.conf"'
ls -la build/zephyr/merged.hex
Location of the HEX file
The built HEX file will be located in build/zephyr/merged.hex
.