Input parameters for m_batt_meas. More...

Data Fields
uint8_t	adc_pin_no
	Analog in pin connected to battery (with possible voltage divider).

nrf_saadc_input_t	adc_pin_no_ain
	Same as above, but given as nrf_saadc_input_t. These two values must correspond.

uint16_t	app_timer_prescaler
	App timer prescaler. See APP_TIMER_PRESCALER.

uint8_t	batt_chg_stat_pin_no
	Pin connected to "Charging status output pin" (CSO) of the battery charger.

uint8_t	batt_mon_en_pin_no
	Pin for enabling battery monitoring.

bool	batt_mon_en_pin_used
	Indicates if a pin is used to enable battery monitoring. (E.g. activates a voltage divider).

uint16_t	batt_voltage_limit_full
	Full voltage limit [milliVolts].

uint16_t	batt_voltage_limit_low
	Low voltage limit [milliVolts].

state_of_charge_t	state_of_charge
	Information on mapping from voltage to state of charge.

uint8_t	usb_detect_pin_no
	Pin = high when USB is connected.

voltage_divider_t	voltage_divider
	Voltage divider type containing resistor information.

Detailed Description

Input parameters for m_batt_meas.

The documentation for this struct was generated from the following file:

Data Fields