Release notes

See the release notes for the information about specific npmx-zephyr releases.

[1.1.0] - 2024-07-17

Changed

• Updated the npmx version to 1.0.1.

• Updated the nrfxlib version to 2.6.1.

• Updated the fuel gauge sample for nrfxlib changes.

[1.0.0] - 2023-12-13

Added

• Added shell commands:

  • npmx adc meas ibat

  • npmx buck active_discharge get

  • npmx buck active_discharge set

  • npmx charger die_temp resume get

  • npmx charger die_temp resume set

  • npmx charger die_temp status get

  • npmx charger die_temp stop get

  • npmx charger die_temp stop set

  • npmx charger die_temp ntc_resistance cold get

  • npmx charger die_temp ntc_resistance cold set

  • npmx charger die_temp ntc_resistance cool get

  • npmx charger die_temp ntc_resistance cool set

  • npmx charger die_temp ntc_resistance warm get

  • npmx charger die_temp ntc_resistance warm set

  • npmx charger die_temp ntc_resistance hot get

  • npmx charger die_temp ntc_resistance hot set

  • npmx charger die_temp ntc_temperature cold get

  • npmx charger die_temp ntc_temperature cold set

  • npmx charger die_temp ntc_temperature cool get

  • npmx charger die_temp ntc_temperature cool set

  • npmx charger die_temp ntc_temperature warm get

  • npmx charger die_temp ntc_temperature warm set

  • npmx charger die_temp ntc_temperature hot get

  • npmx charger die_temp ntc_temperature hot set

  • npmx charger discharging_current get

  • npmx charger discharging_current set

  • npmx charger module full_cool get

  • npmx charger module full_cool set

  • npmx charger termination_voltage warm get

  • npmx charger termination_voltage warm set

  • npmx gpio config debounce get

  • npmx gpio config debounce set

  • npmx gpio config drive get

  • npmx gpio config drive set

  • npmx gpio config mode get

  • npmx gpio config mode set

  • npmx gpio config open_drain get

  • npmx gpio config open_drain set

  • npmx gpio config pull get

  • npmx gpio config pull set

  • npmx gpio status get

  • npmx gpio type get

  • npmx ldsw active_discharge get

  • npmx ldsw active_discharge set

  • npmx ldsw gpio index get

  • npmx ldsw gpio index set

  • npmx ldsw gpio polarity get

  • npmx ldsw gpio polarity set

  • npmx ldsw soft_start current get

  • npmx ldsw soft_start current set

  • npmx ldsw soft_start enable get

  • npmx ldsw soft_start enable set

  • npmx led mode get

  • npmx led mode set

  • npmx led state set

  • npmx pof polarity get

  • npmx pof polarity set

  • npmx pof status get

  • npmx pof status set

  • npmx pof threshold get

  • npmx pof threshold set

  • npmx ship config inv_polarity get

  • npmx ship config inv_polarity set

  • npmx ship config time get

  • npmx ship config time set

  • npmx ship mode hibernate

  • npmx ship mode ship

  • npmx ship reset long_press get

  • npmx ship reset long_press set

  • npmx ship reset two_buttons get

  • npmx ship reset two_buttons set

  • npmx timer config compare get

  • npmx timer config compare set

  • npmx timer config mode get

  • npmx timer config mode set

  • npmx timer config prescaler get

  • npmx timer config prescaler set

  • npmx timer config strobe

  • npmx timer disable

  • npmx timer enable

  • npmx timer watchdog kick

  • npmx vbusin current_limit get

  • npmx vbusin current_limit set

  • npmx vbusin status cc get

• Added CONFIG_NPMX_RESTORE_VALUES Kconfig option that allows for restoring values from PMIC during npmx initialization.

Changed

• Updated the npmx version to 1.0.0.

• Updated the nrfxlib version to 2.5.0.

• CONFIG_NPMX_DEVICE_NPM1300_ENG_C Kconfig replaced with CONFIG_NPMX_DEVICE_NPM1300.

• nordic,npm1300-eng-c devicetree binding replaced with nordic,npmx-npm1300.

• Interrupt pins (host-int-gpios and pmic-int-pin) are now optional in a devicetree.

• Split the buck sample into buck_output_simple, buck_output_advanced, buck_pins, and buck_retention.

• Aligned samples and shell to the following changes:

  • npmx_adc_ntc_set() changed to npmx_adc_ntc_config_set().

  • Battery temperature calculation moved to the ADC driver.

  • NPM1300_ENG_C define replaced with NPM1300.

  • Other minor npmx API changes - see npmx v1.0.0 changelog for details.

  • npmx_core_init() API.

  • Calling npmx_timer_task_trigger() with NPMX_TIMER_TASK_STROBE is no longer needed after npmx_timer_config_set().

• Reduced sleep time for voltage stabilization in LDO example from 1 second to 100 ms.

• Renamed shell commands:

  • npmx adc meas take vbat to npmx adc meas vbat.

  • npmx buck set to npmx buck status set.

  • npmx buck status power get to npmx buck status get.

  • npmx buck vout {get, set} to npmx buck vout_select {get, set}.

  • npmx charger charger_current {get, set} to npmx charget charging_current {get, set}.

  • npmx charger module ntc {get, set} to npmx charger module ntc_limits {get, set}.

  • npmx charger status get to npmx charger status all get.

  • npmx charger trickle {get, set} to npmx charger trickle_voltage {get, set}. They now accept integer values instead of enumerations.

  • npmx errlog check to npmx errlog get.

  • npmx vbusin vbus status get to npmx vbusin status connected get.

• Split shell commands:

  • npmx adc ntc {get, set} into npmx adc ntc type {get, set} and npmx adc ntc beta {get, set}.

  • npmx buck gpio retention {get, set} into npmx buck gpio retention index {get, set} and npmx buck gpio retention polarity {get, set}.

  • npmx buck gpio on_off {get, set} into npmx buck gpio on_off index {get, set} and npmx buck gpio on_off polarity {get, set}.

  • npmx buck gpio pwm_force {get, set} into npmx buck gpio pwm_force index {get, set} and npmx buck gpio pwm_force polarity {get, set}.

• Replaced error messages in npmx errlog get with register field names.

• Refactored shell arguments parsing.

• Refactored shell commands and divided them into separate files.

• Minor fixes and improvements in shell commands.

Fixed

• Fixed PyYAML and Sphinx versions in requirements.

• Fixed an issue in the Shell sample where POF status, threshold, and enable were overwritten during initialization.

• Fixed an issue in the Shell sample where LDSW active discharge enable was overwritten during initialization.

• Minor fixes and improvements in the documentation.

[0.7.0] - 2023-07-12

Added

• Added the fuel gauge sample.

• Added support for nrfxlib.

• Added shell commands:

  • npmx buck status power get

  • npmx buck mode

  • npmx charger module ntc set

  • npmx charger module ntc get

  • npmx reset

Changed

• Updated the npmx version to 0.7.0.

• Aligned samples and shell to the following changes:

  • A new format for convert functions.

  • npmx_adc_meas_get() API.

  • A new backend handling method.

• Removed all unused symbols.

• Added checking for a charger status when setting NTC with the npmx adc ntc set shell command.

Fixed

• Fixed documentation building by removing the path dependency.

• Fixed shell commands to prevent accepting invalid inputs.

• Minor fixes and improvements in documentation.

[0.6.0] - 2023-06-22

Added

• Added basic repository structure.

• Added README.md file.

• Added samples:

  • BUCK

  • CHARGER and Events

  • LDO

  • LED

  • POF

  • Shell

  • Simple

  • Timer

  • Wake-up Timer

  • Timer Watchdog

  • VBUSIN

• Added all of the required files to build the documentation.

• Added pre-commit hooks.